Site Map English 中文

Rotary dryers

Rotary kiln


Feature】: Save pulverized coal, Harmless
【Supply Ability】:8 Set/Sets per Month

Shipping ports】:Shanghai, Qingdao or Tianjin

【Delivery】:15-30 days

【Application】:Widly used for roasting a wide variety of sulfide ores prior to metal extraction.

 

E-mail: service@tdaxy.com

get a quote online faq
Advantages:

1.In rotary kiln dynamic balance kiln skin general are uniform smooth rough material tumbling move smoothly gentle material layer uniform and stable and clinker quality are improved.
2. Eradicate rotary kiln thick skin and kiln circle expanding the effective cross-sectional area of the rotary kiln cement clinker production capacity increased by 10% generally rotary kiln operation rate increased by more than 10%.
3. Rotary kiln is continuous working without change the existing operating parameters without consuming any material the overall economic efficiency improved significantly.


4. Hot rotary kiln treatment with kiln ring personnel and equipment are on outside without rotary kiln temperature harm good adaptability in high temperature large dust environment and there is no danger for personnel and equipment even if the ring collapsed.
5. Effectively curb rotary kiln red kiln rotary kiln knot big and small size egg ball accident kiln liner and bearing motor rotary kiln body can be effectively protected significantly prolong kiln using life.
6. large impact energy high processing speed Kiln knot ring accident can clear the kiln knot ring in a few minutes.
7. The machine has many functions you can prevent the effective removal of knot ring also can crush the big and small size egg ball.


Products:

This kiln is a cylindrical vessel, inclined slightly to the horizontal, which is rotated slowly about its axis.

The materials to be burnt get into the stove from the higher end of the cylinder. Due to the slope and slow rotation of the cylinder, the material moves around from top to bottom along the axis to finish its process. At last, the finished materials get into the cooler through the burner hood. The fuel gets into the kiln through the head of the kiln. The waste gas will be discharged from the end of the kiln after exchanging heat with the materials.

Hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln. Such a flame is projected from a burner-pipe (or "firing pipe") which acts like a large bunsen burner. Fuel for this may be gas, oil, pulverized petroleum coke or pulverized coal.

Technical Parameters:

Specification

Technical parameters

Main reducer

Main motor

Weight
(t)

Rotation speed
(r/min)

Slope
(%)

Capacity
(t/h)

Model

Speed ratio

Model

Power
(kw)

Rotation speed
(r/min)

 

Φ1.9/1.6
×36

0.53-1.59

4

2.5-3

JZQ750-1

48.58

JZT-72-4

30

1200/400

53

Φ2.1/1.8
×36

0.5-1.51

4

4

UT2-110

163.36

JZS-81

30/10

1410/470

75

Φ1.2×25

0.5-1.6

3

4

PM650

40.17

JZTY71-4

22

1200/120

34

Φ1.6×32

0.158-0.258

3

4

PM750

48.57

JZJY61-4

15

1200/120

46.82

Φ1.8×45

0.66-1.98

4

3.5

UT2-110

163.36

JZS-81

30/10

1410/470

80

Φ2.2×50

0.125-1.25

3.5

4

ZS145-11

157

YCT280-4A

30

1320/132

130.71

Φ2.5×50

0.516-1.549

3.5

5.5

ZS165-7

99.96

YCT355-4A

55

1320/440

167.5

Φ3×48

0.3309-3.309

3.5

35

ZL130-14

32.11

ZSN4-250-21B

90

1000/100

237

Φ3.2×50

0.398-3.975

3.5

50

ZL130-16

40.85

ZSN4-280-11B

190

1500/150

263

Φ3.3×52

0.391-3.91

3.5

50

ZSY500-28

27.707

ZSN4-315-082

190

1000/100

280.8

Φ4×60

0.396-3.96

3.5

104

ZSY630-35.5

34.601

ZSN4-355-092

315

1000/100

487.5

Φ4.2×60

0.4165-4.165

3.5

116

ZSY710-35.5

35.526

ZSN4-355-12

420

1000/100

576.1

Φ4.3×62

0.398-3.98

3.5

125

ZSY710-35.5

35.714

ZSN4-355-12

420

1000/100

598.5


Note: No further notice if the technical parameters change.

Contact Form

If you have any problems or questions about our products or need our support and assistance, please feel free to write us, we will reply to you within 24 hours, and never reveal your information to the third party. Thank you! All fields with an * are required.

© 2010 Zhengzhou Taida Company. All Rights Reserved

Home|About|Products|Solutions|News|Service|Contact|