Site Map English 中文

Rotary dryers

Wet Type Dust Remover

Process capacity】:1000mg/cubic meters dense smoke;
Feature】:Less resistance, good insulation and reliable performance;
Application】:metallurgy, building materials and light industries; 


get a quote online faq

  1. No secondary pollution, easy maintenance, easy operation;
  2. Can effectively eliminate liquid or solid particle;
  3. Reduce harmful air; suitable for disposing wet, hot and dangerous gas;
  4. Cover less area; less investment,
  5. Great development space; flexible operation;
  6. High precise; less malfunction;
  7. Advanced system; can design special equipment according to individual requests; 


Wet scrubber is the use of the role of water or other liquids and dust gas dust removal equipment, dust and spray water droplets, water film or wet arm when the device encounters occurred wetting, condensation, diffusion and sedimentation processes, thus separated from the gas out of the gas to purify the purpose. Wet scrubber water as a vehicle, so it is suitable for non-fibrous, can be affected by the cold water and no chemical reaction of dust and gas, not to remove sticky dust. Wet scrubbers have low investment, simple operation, small footprint, can purify the harmful gas, dust humidification and cooling gas, etc. at the same time. Especially suitable for handling high temperature and high humidity and potentially explosive gas purification, but because of the use of water pollutants, sewage mud must be addressed, otherwise it may lead to secondary pollution.

Technical Parameters:
Model HMC-32 HMC-48 HMC-64 HMC-80 HMC-96 HMC-112  
Processed air amount(m3·h) 1500-2100 2100-3200 2900-4300 4000-6000 5200-7000 6000-9000  
Filtered area(m2) 24 36 48 60 72 84  
Filtered air speed (m/min) 1.0—1.5 1.0—1.5 1.0—1.5 1.1—1.7 1.2—1.7 1.2—1.8  
Number of filter bag 32 48 64 80 96 112  
Inlet temperature(℃) ≤120
Equipment resistance(Pa) ≤1200
Inlet dust loading(g/m3) <200
Outlet dust loading (mg/m3) ≤50
Slag discharge pressure(MPa) 0.4~0.6
Slag discharge air consumed (m3/min) 0.10 0.14 0.20 0.24 0.29 0.34  
Negative pressure(Pa) 5000
Note: No further notice if the technical parameters change.
Related equipment:

Contact Form

If you have any problems or questions about our products or need our support and assistance, please feel free to write us, we will reply to you within 24 hours, and never reveal your information to the third party. Thank you! All fields with an * are required.

© 2010 Zhengzhou Taida Company. All Rights Reserved