Site Map English 中文

Rotary dryers

Rice Husk Dryer

【Capacity】: 300-1200t/h

【Power】:4-16.5KW

【Heat Source】:Coal, oil, natural gas, timber and so on

【Drying Materials】:Rice husk, palm shell,wood chips,bagasse,straw,vinasse,slag,coal powder, mining powder,clay,sand,limestone and so on.

E-mail: service@tdaxy.com

get a quote online faq
Advantages:

1.High efficiency and less energy consumption,Saving 5% energy 

2.The efficiency of self heat preservation is higher than 80% ,for single cylinder type ,it is 35%.

3.Compared with the single cylinder type with same capcity ,the 3 cylinder type only cover the 50% ground.It will save the 50% of building cost,60% power cost ,and above 60% fuel.

4.The fuel can be coal ,oil and gas.

5.With the heat resisting ,hear wearing alloy steel plates,Its life is 4 times as the common steel plates.

6.The water content of the product is less than 0.5% after drying .

7.The temperature of out material is lower than 60, it can keep producing and packing without stop .

8.Without the big and small gears,it work with riding wheel.

9.The temperature of out air is low ,and it will increase the life of the life of dust catching system.

10.Simple operation .It is easy to adjust the date of the water content of the product


Products:

Rice husk dryer is suitable for drying materials like sawdust, rice hull, milling wheat straw, corn stalks and so on. The moisture of wet materials is at 20-30%.

The rice husk dryer is equipped one fuel boiler, inlet, steel pipe, exhaust blower (fan), cyclone. Wet materials are input into the hopper. The fuel boiler generates hot air which mixes with wet materials and then is sucked into the pipes by the exhaust blower (fan) quickly. And then hot air is flowing and going though the curving pipes and buffer (drying chamber) of dryer, thus wet materials is finished to dry, and the dried materials are expelled out by the exhaust blower (fan).

Technical Parameters:
Model HJ-I HJ-II HJ-III HJ-IV
Number of motors 1 3 3 3
Power(kw) 4 7.5+0.75+0.75 11+0.75+0.75 15+0.75+0.75
Capacity(t/h) 300-400 500-600 700-800 1000-1200
Diameter of materials 1mm-5mm 1mm-5mm 1mm-5mm 1mm-5mm
Gross Weight(kg) 1100 2260 3080 3120
Consumption of wood waste(kg/h) 10-15 15-20 20-30 25-35
Overall dimension( m )(length*width*height) (space required) 7*2*4 9*2*4 12*2.5*4 12*2.5*4
Working Temperature 400 °C 400 °C 400 °C 400 °C

Note: No further notice if the technical parameters change.

Contact Form

If you have any problems or questions about our products or need our support and assistance, please feel free to write us, we will reply to you within 24 hours, and never reveal your information to the third party. Thank you! All fields with an * are required.

© 2010 Zhengzhou Taida Company. All Rights Reserved

Home|About|Products|Solutions|News|Service|Contact|