Site Map English 中文

Rotary dryers

Continuous Dryer

【Materials】: industrial sludge
【Production Capacity】: 0.8 to 1.5 t/h
【Moisture Content】: 15% to 65%
【Materials source】: it can be used to chemical, medical, pesticide, food, forage and sludge products;

E-mail: service@tdaxy.com

get a quote online faq
Advantages:

1. Easy to adjust; wide adapability
Best drying effects can be fullfilled by adjusting the layer of materials, rotary speed of main shaft, numbers of rake arms, type of rake blade and size of rake blade.
A. Hot and cold media can be sent into each layer of drying tray to cool and heat materials; the temperature of materials is controlled precisely and easily.
B. The staying time of materials can be adjusted precisely;
C. The material flow is very single; no backmixing phenomenon; uniform quality; no need for more mixing;
2. Simple operation
A. The operation of starting and stoping is very easy;
B. After stopping feeding, materials in drier can be evacuated quickly by rakes;
C. Careful inspection and cleaing for equipment can be achieved by mirror of special view door;
3. Low energy consumption
A. Thin material layer; low rotary speed; small power is needed for material transmission; less electricity consumed;
B. Drier is realized by heat conduction; high thermal efficiency; less energy consumed;
4. Sound operation environment; solution can be recycled; the emission of dust meets relavant standard;
A. Normal pressure: owing to the slow flow speed and the distribution of moisture (top part with higher moisture,; lower part with lower moisture), it is hard for floating dust to go up to the top of the equipment. So there is almost no dust in the tail gas emissed from the moisture outlet.
B. Closeness type: there is solvent-recycle equipment installed to easily recycle organic solvent in gas carriny moisture. The recycle equipment is characterized by simple device and high recycle rate. For fammable, combustible toxic and oxidizable matters, nitrogen can work as gas with moisture to enter the closed circuit. Then, the whole process can be operated safely.
C. Vacumm type: under the vacumm circumstance, disc drier is pretty suitable for thermal-sensitive materials.
5. Easy installation and small covering area
A. The drier leaves factory as a whole part; it is transported as a whole part; installating and fixing loaction are very simple. Buyers just need to lift the equipment and put it in place.
B. Due to the layer distribution of drier disc and vertical installation, the covering area is very small even though the drying surface is large. Main process: drying, pyrolysis, burning, cooling, reaction and sublimation;
C. Organic chemical products;
D. Inorganic chemical products;
E. Medicine, food, forage and fertilizers;

Products:

Disc continous drier is a kind of efficient conduction type continous drier. Its special structure and working principle decide its advantages such as high thermal efficiency, low energy consumption, small covering area, simple configuration, easy operation and good operation environment. It is widely applied to chemical, medical, pesticide, food, forage and agricultural sideline products. It enjoys good reputation amony various fields. At present, it is divided into three kinds, normal pressure, closeness and vacumm, four types (1200, 1500, 2200 and 3000), A (carbon steel); B (the area which contacts with materials is made from stainless steel); C (based on B, add steam line, main shaft and bracket made from stainless steel; the liners of drum body and cap top are made from stainless steel). There are three material qualities. Drying area is 4 to 180 square meters. There are hundreds of models in this series of equipment. We can also provide matched auxiliary equipment with these models. Customers’ different demands for drying various materials can be met by our products.

Technical Parameters:
Specification Outer diameter (mm) Height(mm) Drying area(m2) Power(Kw)
1200/4 1850 2718 3.3 1
1200/6 3138 4.9
1200/8 3558 6.6 1.5
1200/10 3978 8.2
1200/12 4398 9.9 2.2
1500/6 2100 3022 8.0
1500/8 3442 10.7
1500/10 3862 13.4
1500/12 4282 16.1 3.0
1500/14 4702 18.8
1500/16 5122 21.5
2200/6 2900 3319 18.5
2200/8 3739 24.6
2200/10 4159 30.8 4.0
2200/12 4579 36.9
2200/14 4999 43.1 5.5
2200/16 5419 19.3
2200/18 5839 55.4 7.5
2200/20 6259 61.6
2200/22 6679 67.7 11
2200/24 7099 73.9
2200/26 7519 80.0
 
Specification Outer diameter(mm) Height(mm) Drying area(m2) Power ( Kw)
2500/6 3150 3319 26.3 4
2500/8 3739 35
2500/10 4159 43.8 5.5
2500/12 4579 52.5
2500/14 4999 61.3 7.5
2500/16 5419 70
2500/18 5839 78.8 11
2500/20 6259 87.5
2500/22 6679 96.3
2500/24 7099 105 13
2500/26 7519 113.8
3000/8 3800 4050 48 11
3000/10 4650 60
3000/12 5250 72
3000/14 5850 84
3000/16 6450 96
3000/18 7050 108 13
3000/20 7650 120
3000/22 8250 132
3000/24 8850 144
3000/26 9450 156 15
3000/28 10050 168
 
 
 
Note: No further notice if the technical parameters change.

Contact Form

If you have any problems or questions about our products or need our support and assistance, please feel free to write us, we will reply to you within 24 hours, and never reveal your information to the third party. Thank you! All fields with an * are required.

© 2010 Zhengzhou Taida Company. All Rights Reserved

Home|About|Products|Solutions|News|Service|Contact|